Beta C55PRO-BO/D4 Orange 4M Double Workbench, Center Leg

$6,090.00

Extended Gray Beta Workstation With A Black And Orange Top Center Door Module Open Lower Bays And Side Service Ports

055000159

Beta C55PRO-BO/D4 Orange 4M Double Workbench, Center Leg

$6,090.00

Customers Notice It First

"The orange bench brings my entire RSC55 workstation together into one organized, professional setup."

▷ Lay Full-Length Parts Across 4 Meters
▷ Keep Air Guns in the Central-Leg Compartment
▷ Drop an Ø 8 mm Air Line Right where you Stand
▷ Anchor a Race-Style RSC55 Bay

Inventive Garage Workshop is an Authorized Beta-Tools Dealer offering the lowest prices in the market, rapid order processing, a super-strong buyer satisfaction guarantee, along with comprehensive, expert support before AND after the sale.

☆ Exclusive Benefits When You Buy from Inventive ☆

Storage Built Into the Center Leg

On a bench this long, the tool you need always seems to be at the far end or in a cabinet across the bay. The Beta C55PRO-BO/D4 builds storage into the frame itself, fitting a 365 × 750 mm compartment with a slide-away door inside the double central leg so air guns and consumables stay within reach of either work zone. A continuous 4100 mm PVC worktop, onboard Schuko power, and a built-in Ø 8 mm air reel round out the surface above it.

🔑 Key Features

Schuko +16+10A and a separate 10A plug, both onboard
Ø 8 mm air reel pays out 10 m of line, then retracts
Tap power and air at the surface, not the wall
Cord reel keeps the line up off a busy floor
Adjustable feet bring the long top dead level

💪 Durable Construction Materials

Shockproof, non-scratch PVC top shrugs off dropped sockets
Hydrocarbon coat wipes off fuel, oil, and brake cleaner
One rag pass clears gear oil with no staining or softening
Steel frame stays put under hammering and heavy clamping
Double central leg keeps the full span steady under load

📏 Capacity

Full 4100 × 700 mm top runs end to end
Center-leg storage measures 365 × 750 mm behind a sliding door
Splits into two work zones around the center leg
Racing orange matches an existing Beta RSC55 lineup
Drops a 1599F/150 vice into ready-drilled holes (sold separately)
RSC55-ready for drawers, cabinets, and tool panels later

The Long Orange Bench Your Bay Builds Around

Four Meters, Fully Loaded, Racing Orange.

The Race-Style Builder — Runs an all-orange RSC55 bay and wants the longest bench in the line to match the cabinets rather than stand out in grey.

The Double-Duty Bay — Puts two techs on one 4-meter surface so nobody waits for bench space or works on top of the other's project.

The Full-Length Fabricator — Lays a complete exhaust run or frame section end to end on the 4100 mm top with nothing hanging off the edge.

The Walk-Saving Tech — Keeps air guns and consumables in the 365 × 750 mm center-leg compartment instead of crossing the bay to a cabinet mid-job.

The One-Bench Shop — Wants onboard power, a built-in air reel, central storage, and vice mounting on one anchor piece rather than five separate buys.

Four Meters, Fully Loaded, Racing Orange.

The Race-Style Builder — Runs an all-orange RSC55 bay and wants the longest bench in the line to match the cabinets rather than stand out in grey.

The Double-Duty Bay — Puts two techs on one 4-meter surface so nobody waits for bench space or works on top of the other's project.

The Full-Length Fabricator — Lays a complete exhaust run or frame section end to end on the 4100 mm top with nothing hanging off the edge.

The Walk-Saving Tech — Keeps air guns and consumables in the 365 × 750 mm center-leg compartment instead of crossing the bay to a cabinet mid-job.

The One-Bench Shop — Wants onboard power, a built-in air reel, central storage, and vice mounting on one anchor piece rather than five separate buys.

Features & Benefits

4100 mm continuous worktop — Runs a full exhaust or frame section flat from one end to the other, braced by the double center leg

365 × 750 mm center-leg compartment — Holds air guns and shop supplies right in the bench, not in a roller cab across the bay

Onboard Schuko +16+10A and 10A outlets — Keep chargers, lights, and power tools live at the bench with no extension cords

Built-in Ø 8 mm air reel — Pulls 10 meters of line to any spot on the bench, then reels it back in

Hydrocarbon-resistant PVC top — Sheds motor oil, gear oil, and solvent so the surface never stains or softens

Racing-orange finish — Matches a coordinated Beta RSC55 bay so the longest bench fits right in

Pre-drilled 1599F/150 vice mounting — Bolt a vice to either end for cutting, filing, and assembly work (vice sold separately)

Beta RSC55 platform — Bolt on drawer units, roller cabs, and wall panels as the shop grows, no bench swap