NewAge Pro Series 6-Piece Garage Cabinet Set – 128" Wide System

Plan on two people for a smoother install, and always anchor into wall studs (or use the correct masonry anchors) while staying within the load ratings—up to 1,000 lb for base/tool cabinets and 200 lb for wall cabinets. Your hardware pack covers essentials like washers, bolts, clips, dividers, and top brackets, but you’ll bring the drill/driver, stud finder, level, tape measure, the right bits, and lag screws or masonry anchors matched to your wall. Start by adjusting the leveling feet so the first cabinet is plumb and square, then line up the rest and fasten them together as you go. For easier handling, pull the drawers before positioning the units, then slide them back onto the full-extension glides and add the foam liners/dividers for instant organization.

If you’re installing a worktop, mount it with the supplied brackets and double-check measurements for clean alignment, then set shelves and locker rods using the included clips. You can either create one continuous floor run by ganging cabinets together, or wall-hang using Easy Wall brackets (or equivalent) with proper fasteners for wood studs or block/brick. Finish by re-leveling the whole run, tightening all hardware, dialing in door/drawer alignment, and covering any exposed holes—and once everything is installed correctly and used within the ratings, it’s backed by NewAge’s Limited Lifetime Warranty.